Best DOT-3 Automotive Brake Fluids to Buy in 2022

The braking system is one most important and mandatory aspects of your daily automotive precautionary routine. A failure and damaged braking system can cause an incident you had never thought of.

It is necessary to check the brake system regularly and to fix any issues that occur.

Most of the time brake issues are caused by brake fluids being contaminated or vaporized. Today we will be discussing brake fluids, and we will also give you a list of some of the best brake fluids in the market right now. So, if you are looking for suitable Dot-3 Brake Fluid for your car, here’s a bunch of them in our bucket.

Let’s find out.

Best DOT-3 Automotive Brake Fluids

What is Brake Fluid?

Brake fluids are hydraulic fluids or lubricants used in the hydraulic brake and clutch system of a vehicle. Usually pressing the brake pedal generates a force that is converted into pressure to the front and rear brakes and stops the vehicle.

But, this causes moisture and vapor to get absorbed by the fluid due to the composition. Talking about the composition of the fluids, the DOT 3, 4, and 5.1 are Glycol-based fluids, and this composition starts absorbing moisture once it is poured into the system or exposed to the air.

Evenly the fluid losses its efficiency and gets moisturized causing difficulties while braking the car. Therefore, additional brake fluids are necessary to put in the system once the proprietary lubricant is contaminated. 

Types of brake fluid

Brake fluids do have a classification that ensures the perfect blend of your braking system with the performance. Four types of brake fluids are available in the market. They are,

  • Dot 3
  • Dot 4
  • Dot 5 and
  • Dot 5.1

They all perform with the Department of Transportation (DOT) standards. There is an important aspect to look at before you put on your fluids on your brake. A slight difference is noticed with the Dot 5 that it is based on silicon. And Dot 5 does not absorb moisture. Where Dot 3, 4, and 5.1 do. Other than that all four types of brake fluids are capable of maintaining your car's braking system on point.

Best Dot-3 Brake Fluids

To find out the best DOT-3 fluid for your braking system, we have discussed some of the most popular and user-oriented brake fluids regarding customer reviews. We will be talking about the efficiency and both the positive and negative aspects of each of them.

So, let’s get started with our Best DOT-3 Brake Fluid product list.

1. Prestone AS400 DOT 3 Synthetic Brake Fluid

Prestone DOT 3 Synthetic Brake Fluid

Since 1927, Prestone has been a leader in the extended engine life technology market and has protected drivers and their vehicles with cutting-edge products. From its iconic yellow jug antifreeze/coolant to its innovative stop leak line, the Prestone brand honors its 90-year history by keeping its groundbreaking formulas laps ahead of the competition.

Prestone AS400 DOT 3 Synthetic Brake Fluid is so far one of their most cost-effecting innovation of the lubricant line. Let’s dig out for more information about this DOT-3 brake fluid.

Key information

Manufacturer

Prestone

Product dimensions

‎3 x 3 x 6 inches

Item weight

1 pound

Braking system  

ABS, Disc, and Drum Brake System

Min. Dry Boiling Point

460 degrees Fahrenheit

Min. Wet boiling Point

284 degrees Fahrenheit

Country of origin

China

Certification

FMVSS, SAE

Is discontinued

No

Product details

Since the boiling point is the first important aspect to develop, Prestone Synthetic Hi-Temp Brake Fluid is designed to provide an extra margin of boiling point protection. With a noticeable higher amount of dry boiling point and wet boiling point, this is more efficient than conventional brake fluids in the market.

The mix of Poly-glycol Ether ensures hot brake-system operation will not create dangerous vapor. This delivers braking power when needed by avoiding a spongy pedal. Lack of excessive vapor and moisture increases the efficiency of the system.

Both wet and dry boiling points exceed the minimum government standards. A comprehensive inhibitor package protects vital brake system metals.

Prestone Synthetic Brake Fluid is designed for the safe operation of today’s modern brake systems. Excellent for ABS, disc, and drum brake systems. All kinds of hydraulic braking systems have available fluid that ensures an enhancement to the service period.

The minimum dry boiling point is 460 degrees Fahrenheit (238 degrees Celsius). And the minimum wet boiling point is 284 degrees Fahrenheit (140 degrees Celsius). This product complies with Federal Motor Vehicle Safety Standard 116 and meets SAE J1703.

User experience

More than 80% of sum users are satisfied with the product. The efficiency and the durability of the fluid serve the consumer as expected, according to the user.

It is recommended by experts and average users that are benefitted in the long run with this Prestone AS400 DOT-3 Synthetic Brake Fluid.

Pros

  • 460° Fahrenheit Dry Boiling Point.
  • 284° Fahrenheit Wet boiling Point.
  • Suitable for all hydraulic brake system.
  • Achieves both FMVSS and SAE certification.
  • User’s favorite.

Cons

  • Excellent on stripping paintwork.
  • Harmful chemical for health.

2. Genuine Chrysler Fluid 4318080AD DOT-3 Motor Vehicle Brake Fluid

Chrysler is a renowned company for automotive oil and accessories in the USA. Their Genuine Chrysler Motor Vehicle Brake Fluid is one of the consistent products of this brake fluid lineup.

This is an OEM Dodge/ Mopar factory fit product that offers OEM brake fluid experience with both the SAE and FMVSS certifications.

There’s more to know about the Genuine Chrysler Fluid 4318080AD DOT-3 Motor Vehicle Brake Fluid.

Key information

Manufacturer

Chrysler

Product dimensions

‎4 x 4 x 1 inches

Item weight

0.85 pounds 

Braking system

Hydraulic Brakes (Disc or Drum)

Min. Dry Boiling Point

-

Min. Wet boiling Point

-

Country of origin

United States

Certification

SAE and FMVSS

Is discontinued

No

Product details

Like any other brake fluids on the market, this Genuine Chrysler Fluid DOT 3 Motor Vehicle Brake helps increase the ability and agility of your braking system in your car. The fluid absorbs a little amount of moisture and liquid that can contaminate the fluid liquid.

It is suitable with regular hydraulic brakes like disc or drums braking systems. Thus, it has been one of the most popular brake fluids in today’s market. For both the Dodge Challenger and Dodge Charger, this is a perfect alternative and OEM brake fluid to buy aftermarket.   

Genuine Chrysler Brake Fluid is made in the United States of America. It passes the FMVSS (Federal Motor Vehicle Safety Standards) 116 and SAE J1703. You can rely on this product with the certifications of ingenuity achieved by the product.

Once your factory-provided brake oil gets spoiled or dirty, it starts to malfunction with your braking system first. At that point, the Genuine Chrysler Fluid 4318080AD DOT-3 Motor Vehicle Brake Fluid comes with the standard certifications that ensure your vehicle’s faster braking system.

With a higher Dry Boiling point and Wet Boiling point, this OEM lubricant is more efficient. (Mentioned on the label of the bottle).

User experience

Like the previous one on our list, this one is also very popular among the users. More than 80% of the users are satisfied with the brake fluid by Chrysler.

Since it is an OEM product it cost a bit more than the traditional ones out there. But in exchange for the money, it is fairly recommended by the users and experts.

Pros

  • Provides safety in extreme braking conditions.
  • The mix of Polyglycol Ethers.
  • Excellent for ABS, disc, and drum braking system.
  • Meet or exceeds Dot 3 certifications.
  • Recommended by experts.

Cons

  • A bit pricey considering regular brake fluids
  • Hazardous to paintworks

3. Lucas Oil 10826 Brake Fluid

Lucas Oil  Brake Fluid user

Lucas Oil Product Inc. has been improving and impacting lives since the beginning. They have an unwavering commitment to creating superior solutions to everyday problems. Lucas Oil 10826 Brake Fluid is a part of that mission.

Affecting the automotive brake assessment in a great manner the 10826 Brake Fluid is one of the expert solutions and alternatives for the OEM brake fluid of any vehicle.

Key information

Manufacturer

Lucas Oil Products

Product dimensions

‎3.5 x 3.5 x 8.8 inches

Item weight

2.2 pounds

Braking system  

Disc, Drum, and Clutch System

Min. Dry Boiling Point

401 degrees Fahrenheit

Min. Wet boiling Point

-

Country of origin

United States

Certification

FMVSS and SAE

Is discontinued

No

Product details

Lucas DOT 3 Brake Fluid is a high-quality blend of Polyethylene Glycol Ether’s and additives which meet or exceed the industry minimum dry boiling point of 401. It meets the Federal Motor Vehicle Safety Standard (FMVSS) No. 116 and SAE J1703 specifications.

The composition of Polyethylene Glycol Ether has improved the boiling point of the liquid and made it more moisture resistant to absorb. This is the fluid that is going to stay decontaminated for more than years.

It is suitable for the hydraulic brake system available in most of the cars on the run. Lucas DOT 3 Brake Fluid is recommended for use in both disc and drum brake systems and clutch systems where this type of product is called out for.

Lucas DOT 3 Brake Fluid is compatible with all brake system rubber components and other brake fluids. It prevents seal hardening or softening. It protects against rust and corrosion and provides excellent lubricity.

The fluid is available in 12 ounces and 32-ounce bottles. Now you can save your pocket from banging with extra bucks.

User experience

Refilling with the DOT-3 brake fluid by Lucas Oil made a change almost in every braking experience of the users. Most of them are satisfied with the ability to suck the heat and keep the pressure on top for a longer period.

Flushing the brake system with this Lucas Oil 10826 Brake Fluid had has made improved the entire brake system of the car in most cases.

Pros

  • A high-quality blend of materials.
  • Protects against rust and corrosions.
  • Provides excellent lubricity.
  • Prevents seal hardening and softening.
  • Compatible with all brake systems rubber components.

Cons

  • Losses boiling point temperatures with time
  • Exposure is harmful to human health 

4. ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid

ACDelco is the true General Motors Original Equipment parts brand, infusing a century of experience, innovation, and quality into more than 90,000 GM OE and other parts.

It has been manufacturing the original equipment and has been a trustworthy brand for professionals for a long time now.

The DOT-3 Hydraulic Brake Fluid is a very popular addition to its quality accessories. To find out more about the product keep the study to the edge.

Key information

Manufacturer

ACDelco

Product dimensions

‎2.7 x 2.7 x 7.2 inches

Item weight

1.2 pounds

Braking system  

Hydraulic Clutch and Brakes

Min. Dry Boiling Point

-

Min. Wet boiling Point

-

Country of origin

United States

Certification

FMVSS and ISO

Is discontinued

No

Product details

ACDelco Clutch and Brake Fluid, DOT-4 GMW is a premium brake and hydraulic clutch fluid for systems requiring FMVSS No. 116 DOT-4 and  ISO 4925, Class 6. Meaning this is suitable for almost all the hydraulic braking systems in a car.

ACDelco Clutch and Brake Fluid, DOT 4 GMW is suitable for all applications requiring a DOT 4 performance level brake fluid and meets GMW 3356. The ACDelco Clutch and Brake Fluid, DOT 4 GMW protects internal components from corrosion under normal use and service.

Dot-3 and Dot-4 classes, requiring all types of barking systems, are always high-performance brake fluids that are used for any vehicle that comes with a hydraulic pressure braking like Disc or Drum.

They provide a huge advantage when are at the dry boiling point. With a significant amount in both Dry and Wet boiling points,  the brake system is more effective and smoother than before.

Like all other brake fluids, this fluid can influence your braking system if contaminated. So, it is a good choice to check for the brake fluid regularly.  

User experience

Customers have been happy with the overall packaging and the price of the fluid. The lubricants have improved the braking system since the refill in almost all cases.

A good choice by the experts for highly customized vehicles.

Pros

  • High boiling point
  • Good high and low temperature
  • Good for colder places
  • The professional choice for fit, form, and function
  • Both FMVSS and ISO certified

Cons

  • Chemicals are harmful to human health
  • Will damage the paintwork if spilled

5. MAG1 120 Premium DOT 3 Brake Fluid

MAG1 is a premium DOT-3 brake fluid manufacturer and works with other automotive accessories too.

The MAG1 120 Premium DOT 3 Brake Fluid is one of their productions known widely. Complete detail is given right below the key specs of the item.

Key information

Manufacturer

MAG1

Product dimensions

‎3.38 x 3.38 x 8.94 inches

Item weight

2 pounds

Braking system   

ABS, Disc, and Drums

Min. Dry Boiling Point

494 degrees Fahrenheit

Min. Wet boiling Point

292 degrees Fahrenheit

Country of origin

USA

Certification

FMVSS, SAE

Is discontinued

No

Product details

The MAG1 120 Premium DOT 3 Brake Fluid is a specially blended formula that meets or exceeds the highest standards of performance and safety for a DOT 3 fluid. Where the minimum dry boiling temperature is 401° and the wet boiling temperature is 284° Fahrenheit for DOT-3 certification, this fluid leads with a far more boiling point than that.

For all disc and drum brake systems, this fluid is suitable. Including ABS, in which a DOT 3 fluid is recommended, this fluid runs perfectly the system. Hydraulic brake system efficiency gets a bump up with the bleed of this brake fluid. 

 The brake fluid complies with Federal Motor Vehicle Safety Standard 116. It also surpasses SAE Spec. J1703. With that, it is quite a good choice for brake fluids on paper.

The Minimum Wet Boiling Point is 284°F (140°C) to 292°F, which is more than any traditional brake fluid boiling point.

Consistent use of the product will allow you to continue with a better experience of your vehicle’s braking system than before. One particular aspect to remember, one should not mix a DOT-3, 4, or 5.1 fluid with DOT-5 brake fluid. Due to the different compositions of the lubricant a DOT-5 fluid cannot be a substitute. 

User experience

A fairly good amount of positive reviews are found online referencing the MAG1 120 Premium DOT 3 Brake Fluid. The efficiency and durability of the fluid are up to mark.

And users claim to be satisfied with the performance of the lubricant.

Pros

  • Leading with a higher boiling point
  • Consistent performance
  •  Certified with FMVSS and SAE
  • Relatively cheaper

Cons

  • Moisture absorbent
  • Can cause paintwork corrosion

6. STP Heavy Duty Brake Fluid for DOT 3

STP Heavy Duty Brake Fluid for DOT 3

For over 60 years and for more miles than anyone can count, STP has been one of the most trusted names in automotive care. Their Heavy Duty Brake Fluid for DOT-3 is one of the trusted items of the brand in that regard.

This brake fluid adds a smoother experience with the braking system of your car and fixes minor problems facing with the brake lubricants.

Key information

Manufacturer

STP

Product dimensions

2.29 pounds

Item weight

‎8.7 x 3.4 x 3.3 inches

Braking system  

ABS, Disc, Drums

Min. Dry Boiling Point

-

Min. Wet boiling Point

-

Country of origin

United States

Certification

FMVSS, SAE

Is discontinued

No

Product details

Protects DOT 3 ABS disc or drum brake systems from getting spoiled by the dirty lubricant of the system made over time. Since these fluids are moisture absorbent, they suck the heat moisture and get their efficiency dropped at a faster rate.

Helps protect against brake failure from vapor lock maintaining less evaporation of the liquid and absorbi9ng in a less amount.

Helps prevent corrosion in the brake system by providing extra effort to the heat abuse and temperature boiling point.

Works with all brake systems requiring DOT 3 brake fluids and does the job nicely with easy filtration.

Exceeds Federal Motor Vehicle Safety Standard No. 116 and meets SAE.

STP Heavy Duty Brake Fluid DOT 3 is specially formulated to coax an optimum performance out of disc or drum brake systems in today’s cars and trucks. Protects brake system for DOT-3 ABS disc or drum brakes.

User experience

Users are happy and satisfied with the quality of the lubricant and the performance of the fluid. The efficiency offers the item a great score.

This is recommended by both the regular user and by experts. Users have barely complained about the quality of the product.

Pros

  • FMVSS and SAE certified
  • Supports more braking systems
  • Affordable

Cons

Paintwork may get damaged with the liquid spilled

7. Mopar Chrysler Dodge Jeep Ram Dot 3 Brake Fluid

The customer care and parts service center division by former Chrysler Corporation is the Mopar. It has been providing services toward the Chrysler owner and the car enthusiast people around the States.

This Dodge Jeep Ram Dot 3 Brake Fluid is a well-known lubricating product by the manufacturer and has been assisting the brake system of vehicles for a long time. For detailed information please continue the article.

Key information

Manufacturer

Mopar

Product dimensions

-

Item weight

12 FL Oz

Barking system  

Hydraulic Disc and Drum

Min. Dry Boiling Point

-

Min. Wet boiling Point

-

Country of origin

USA

Certification

SAE, FMVSS

Is discontinued

No

Product details

 Mopar is a subsidiary of Chrysler Corporation and the Mopar Chrysler Dodge Jeep Ram Dot 3 Brake Fluid is one of its successful products.

This fluid is available for hydraulic brakes like ABS, drum brakes, or discs. Combining with the usual composition this is one of the most common fluid types available in the market.

Dodge Jeep Ram Dot 3 Brake Fluid features a good amount of Dry and Wet boiling points that ensure the temperature and evaporation damages in a less amount.

This is a certified brake fluid that can be used in any brake system. (except for the one that uses DOT 5 brake fluid)

Need to maintain basic precautionaries before refilling the lubricant into the brake system. Rather spilling of the composition may cause corrosion to the paintworks and may impact badly on your health.

User experience

There is a fair amount of positive reviews on this product. Users are happy and have only a few complaints about the delivery issues.

Other than that, they are mostly satisfied with the quality and the performance of the fluid.

Pros

  • Works perfectly with a better Dry and Wet boiling point
  • Have both SAE and FMVSS certification
  • Smoothens the braking experience
  • offers more efficiency than traditional ones

Cons

The spill of the liquids can damage paintwork

8. Johnsen’s 2232 Premium DOT-3 Brake Fluid

Johnsen’s 2232 Premium DOT-3 Brake Fluid is a trustable brake fluid among car owners. This has been a good alternative to the OEM fluids that keep the braking system almost as good as new.

The premium quality of material and the heat-transforming energy of the liquid increases the braking control.

There’s more to know. Have a look at the product details to know more 

Key information

Manufacturer

Johnsen’s

Product dimensions

‎8.7 x 3.5 x 3.5 inches

Item weight

2.14 pounds

Braking system  

Disc, Drum, and ABS

Min. Dry Boiling Point

450 degrees Fahrenheit

Min. Wet boiling Point

-

Country of origin

-

Certification

SAE and Federal Standards

Is discontinued

No

Product details

Synthetic DOT-3 Brake Fluid has a minimum boiling point of 450°F, making it the highest and toughest of the competitors. With a comparatively higher dry boiling point of the fluid, it is the most efficient brake fluid on the list.

Meet and exceed DOT 3 and all other Federal and SAE specs and standards for motor vehicle brake fluids, achieving the standard certifications by improving the overall performance of the fluid.

Exceeds Federal Motor Vehicle Safety Standard No. 116 and meets SAE spec. J1703 that makes it achieve another standard class of ingenuity. 

Mixes with all DOT 3 approved brake fluids. Though it is recommended to use only one brake fluid before each bleed.

Hydraulics brakes are suitable for this premium dot 3 fluid brake. Designed for use in a disc, drum, and ABS braking systems. Making it more useful and heavy-duty.

Available in 7 oz., 12 oz., 32 oz., and Gallon. So that you can purchase according to your necessity.

User experience

With the Premium Dot-3 Brake Fluid by Johnsen,  customers are satisfied and they have spoken positively.

The quality of the liquid and the service the fluid provides get all the positive marks via them. It is believed that this is a good alternative to the OEM product.

Pros

  • SAE and Federal standards certified
  • Higher boiling point than any other
  • Exceed FMVSS standards
  • Design for most of the braking systems
  • Does not absorb water easily
  • Triggers the braking pressure when paddled over

Cons

  • Fluids are paint-stripping and damages paintwork of the car
  • May feel thinner than other vehicles.

Dot 3 VS Dot 4: What is the main difference?

Most people tend to know the differences between the Dot 3 and Dot 4 Brake fluids. There is the side by side comparison for those who seek to know. Hope this gives a clear idea of both of them and their efficiency.

Subject

Dot 3

Dot 4

Dry boiling point

401

446

Wet boiling point

284

311

Composition

Glycol Ether

Glycol Ether/Borate Ester

Here, you see the differences between these two brake fluids. The boiling point temperatures are both high on the Dot 4 brake fluids leading them to a superior position. With a rich composition of the material, the Dot 4 Fluids are more efficient.

Dot 5 features a completely different liquid blending with a silicon-based lubricating mixture. If your car supports the Dot 5 braking fluids then do not use Dot 3, 4, or 5.1.  

How to choose DOT-3 Automotive Brake Fluids?

Buying a brake fluid for your car is not less of an important task anyway. You need to have the knowledge and the best quality lubricant for your braking system. Since the braking system is highly dealt with brake fluids, one must ensure a good and efficient brake fluid that would do the job nicely saving the pocket at the same time.

To finds out the best pick for you, we have enlisted leading and quality products in our list. Yet, looking for some more you can follow our simple guidelines that will help to find the perfect suit for your vehicle.

Lubricant Composition: Two types of major differences are seen with the material composition of brake fluids. Glycol-based lubricants are used widely and in most vehicles on the road. There are some silicone-based fluids standards as DOT 5. These are quite different than others.

Boiling Temperature: DOT certifications are given considering the boiling point temperature of a fluid. The more the boiling temperate the better the fluid is. Categorized in dry and wet boiling points, select the one that offers you the greater value.

Price: Consider the price gaps while buying ta brake fluid. Look for the envelope and the quantity of the fluid along with the price.  

What type of fluid is good for my Dodge Challenger?

Ans. DOT 3 brake fluids are handy with the price. Try one of our enlisted items.

How much would cost STP Heavy Duty brake fluid?

Ans. No more than $19.

How frequently do I need to change my brake fluid?

Ans. In most scenarios, after two or three years once check the fluid quality. if looks dirty then chance and refill. 

Is refilling costly?

Ans. Refiling is less expensive than changing the complete lubricant.

Why can’t I refill my system with a DOT 5 fluid?

Ans. The braking system used DOT 3, 4, or 5.1 is not compatible with DOT 5 brake fluids.

Final words

Brake fluids are a part of the entire automotive safety precautionary. This is to ensure that the fluid is not exposed to the air or if any leakage is found fix it immediately.

The whole barking system can crash due to irregularities in fluid evaporation. So, please check the brake fluid every couple of years after the refill session. We believe that our enlisted products guide you to the one necessary for your vehicle's braking system.

Last Updated on June 17, 2022 by sajjad

Leave a Comment

Your email address will not be published.