7 Best UTV chase lights: Light up the UTV in harsh weather conditions

We use affiliate links and may receive a small commission on purchases. Read more about us.

You might lose one of your fellow riders in the foggy weather because of not having tail lights. But you can bring an end to this problem by installing chase lights on the rear before heading for the next off-road trip.

These lights are neither like ambient light nor dome lights, which enlightens the vehicle’s interior. It’s all about increasing the vehicle's safety when you are going through the harshest condition on the terrains.

Moreover, these lights are safe to use in any weather conditions because of have up to an IP68 waterproof rating. In most cases, the lights are installed with roof racks.

Does one need chase lights for UTV?

Why wouldn’t one want to ensure safety on the trails? If you already have rock lights underneath the vehicle, then enhance the safety by installing chase lights. Here are the reasons you should get one for your UTV.

1. High-quality aluminum alloy housing.
2. Waterproof rating up to IP68.
3. High-quality polycarbonate.
4. The ability to get the vehicle under the toughest condition.
5. Several types of light patterns and modes.
6. Easily controllable switches.

Except for enhancing the UTV’s safety, chase lights are a good way to decorate it. However, you can also try LED whip lights in case you want to decorate the vehicle with flags.

Top 7 best chase lights for UTV

The lights are all about increasing the safety of the off-road vehicle during bad weather conditions. Therefore, you must ensure having superb quality in the lights with a variation in the color patterns.

1. Xprite 36" Rear LED Chase Light Bars

Key specifications

Users experience after using the light

The LEDs used in the light bar are super bright, and it is easy to install as well. According to the users, they work pretty well as turn signal and brake lights too.

However, the outer six lights will always light up after turning the switch on. It could have been better if the user could control it manually. Except for it, it has been a handy job to change the colors patterns.

Compared to the pricing, the quality of the lights is up to the mark. But on a full-size SUV, the extension cable won’t cover the entire area.

More details you need to know

The light bar has six blocks, where the first and sixth one is used for run, stop and turn signal lights. Again, the second and fifth one is for strobe lights. Meanwhile, the third and fourth block is for reverse light.

To have increased visibility, the manufacturer used a flood lens in the LEDs. The high-quality PC plastic lens is shatterproof and scratch-resistant. Moreover, it has a shockproof and corrosion-resistant aluminum housing.

It provides a universal fit to vehicles with 12 volts power source. However, with the 15 feet cable and mounting brackets, the installation became hassle-free. Using the screw holes, both ends of the bracket can angle the position up and down.

In the package, you will get two different types of control switches. The traditional one has one power button and another button to change the strobe patterns.

Meanwhile, press the rocker switch downward and back to the middle for the power on/off function. However, press it upward to change between seven strobe patterns.

The good

1. The flood lens increases visibility and safety during rough weather conditions.
2. Longer lifespan with shockproof and shatter-resistant construction.
3. It is easy to install.
4. Provides super bright lighting than other LEDs.
5. Convenient to control the color patterns with double switches.

The bad

It requires an extension cable for 4-door model vehicles.

2. Rigid CHASE- TAIL LIGHT RED

Key specifications

Users experience after using the light

The awesome red amber light performs accurately on the right type of application, but not in every application. However, with the included instructions, it has been a hassle-free installation process. Moreover, the pricing is satisfactory for the users.

All the five different lighting features appear to be useful on the terrains. However, the nuts delivered with the package for mounting aren’t up to the mark. However, there are mixed reactions regarding the giant logo.

Where maximum users ignored the logo, some of them wanted the light with this logo.

More details you need to know

The light bar ensures long-lasting service with the integrated high-efficiency aluminum heat sink. The light bar offers a total of five different modes including strobe, courtesy, reverse, running, and base. Moreover, it comes in amber, blue and red colors.

The manufacturer has added an extremely bright 169 lumens downward white LED facing light to use it as a cargo light. Again, 716-lumen rear-facing white LED is used here as area or reverse light.

According to the manufacturer, you can install the light bar on various off-road vehicles. The list of vehicles can include UTV, jeep, buggy, rail, etc. Meanwhile, it’s pretty easy to install the lights using the 1.75 to 2 inches tube mount.

Also, to ensure a universal fitting the package comes with an L bracket.

The good

1. It is easy to install and wire the light bar.
2. The rigid quality of the housing makes it long-lasting.
3. Provides powerful lighting as brake lights and reverse lights.
4. It comes with five different light modes.
5. It is usable in most off-road vehicles.

The bad

The mount base looks a bit cheaper.

3. 35" Off-Road LED Chase Light Bar For UT

Key specifications

Users experience after using the light

Although it’s on the lower side of the cost, the lights are superbly bright on the trails. Within this price range, the users actually got more than they anticipated. However, it has not been a daunting task as well to install.

The sturdiness of the light bar makes it worth using even in the roughest terrain conditions. Well, there is a couple of major complaints about the light as well.  The installation cable supplied in the package is a bit thinner than usual.

Moreover, you won’t get any switch in the package to control the light and change the flash patterns.

More details you need to know

With the IP76 waterproof rating, the light has the approval to use under any unfriendly terrain circumstances. According to the manufacturer, it comes with a rugged aluminum housing that enhances the lifespan.

The light bar is convenient to install using instruction and an L-shape mounting bracket. Also, you will get a 120 inches cable to finish up the installation without any interruption. It has hard-hitting amber strobes with a central white scanner pump.

It flashes away from the dark and haze efficiently to make trail riding safer anytime. The universal fitting design makes it an appropriate chase light bar for trucks, ATVs, and UTVs.

Using a control switch, you can shift the amber lights from strobe to a solid array of driving lights, reverse lights, and cargo lights. After installation, it almost becomes part of the UTV.

The good

1. It removes the haze, fog, or any rough weather condition.
2. The well-made light bar has an aluminum housing with powder coating.
3. It adds uniqueness to the vehicle.
4. The light is convenient to mount on the rear of the vehicle.
5. It is possible to have distinct viewing through the dust.

The bad

The provided mounting wire is a bit thinner.

4. Nirider Chase Light Bar, 20 Inch

Key specifications

Users experience after using the light

The light is easy to install as it comes with a pigtail to make the daunting task convenient. According to the users, it provides an exquisite brightness like daylight.  However, the remote seems crappy as it doesn’t work properly to let the light function.

Another major complaint regarding the light is the pricing. It seems the manufacturer could keep the price a bit low what it is right now. Moreover, they didn’t find any mounting bracket in the package, which is a disappointing part.

More details you need to know

The super bright light comes with 13 different light modes. The low-profile design enables a universal fit to it. It has a long lifespan being shockproof, rustproof, waterproof, dustproof, and ultraviolet-proof. The manufacturer used a solid extruded aluminum body.

Connect the wires to the right place and use the adjustable brackets to install the light bar. That’s all one needs to do for installing the chase lights. Crossmember, back bumper, roof rack are a few ideal spots for the installation.

It is easy to control the lights using the provided switch. You need to use the first button to turn on and off the switch. However, use the second button to change the strobe light patterns.

For installation, the buyer will also get stainless steel nuts, bolts, washers, and wrenches.

The good

1. The light bar is vibration-proof with an unbreakable lens.
2. The wire harness makes the in-dual switch hard to lose.
3. It is surprisingly bright even after a long time of usage.
4. Convenient installation with the provided instruction.
5. Brightness is worth the price.

The bad

The wires could be a bit longer.

5. kemimoto UTV Chase LED Light

Key specifications

Users experience after using the light

The users seem satisfied with the brightness of the light even though it’s on the cheaper side. Moreover, the reverse light appears to be the brightest among the other lights.

The brightness is more than enough that it can make the vehicle move through a foggy condition as well without much discomfort. However, the four screws included in the package could have been better.

Also, a few users seem to complain of not having any installation clamp in the package.

More details you need to know

Though the light bar doesn’t support universal fit, it’s compatible with different UTV and SUVs. According to the manufacturer, the compatibility chart follows Polaris, Pioneer, Can-am, Kawasaki, Yamaha, etc. It has three halo colors including red, amber, and blue.

With the 12 volts DC operating voltage, you can enjoy five different working modes here. When you are driving the vehicle, it will provide red light. Meanwhile, it will turn to amber while braking.

And when the vehicle is reversing, there will be blue light. With the well-sealed and durable housing, the manufacturer has ensured a long-lasting life of the lights. Moreover, it’s always ready to withstand rough weather conditions.

The package includes a mounting L-shape bracket to make the entire installation process hassle-free. Moreover, 1.75 to 2 inches adjustable tube-mount for a similar process.

The good

1. The lights can make your vehicle run in dusty and harsh conditions.
2. The brightness is more than enough.
3. It offers three different colors in different situations.
4. Extended lifetime because of the durable housing.
5. It is easy to install the light.

The bad

The installation screws aren’t up to the mark.

6. LED Chase Light Bar, OFFROADTOWN 30''

Key specifications

Users experience after using the light

Being an affordable and highly bright light bar, it proved to be a value for money product. According to the majority of the users, it’s a lightweight light bar that is easy to install. With high-quality housing, it provides a longer lifespan.

Both the switches in the package are worth usable to control the lights and change the color patterns. Moreover, the high-quality light-up function ensures the safest journey of the users even in the harshest condition.

More details you need to know

You will get brake, running, and turn signal lights in the light. However, the manufacturer has provided two different types of switches to keep control of the lights and change the working ways.

In the package, you will get two different types of control switches. The traditional one has one power button and another button to change the strobe patterns. Meanwhile, press the rocker switch downward and back to the middle for the power on/off function.

However, press it upward to change between seven strobe patterns. The first and fifth red brake, turn signal and running lights with blinker capacity in the five blocks. The second and fourth blocks have amber strobe with solid.

Meanwhile, block three has white reverse, flood, or work lights for area lighting. The aluminum housing has maximum heat dissipation and unmatched durability.

The good

1. Easy to control the chase lights using two different types of switches.
2. The lens bar is resistant to dust and moisture.
3. The aluminum housing provides unmatched durability.
4. It offers nine different color patterns.
5. It’s a value for money product.

The bad

Everything seems okay with the light.

7. The rear LED Chase Light Bar, Teochew-LED 20 Inch.

Key specifications

Users experience after using the light

It’s easy to operate with the light as it starts up as soon as the user connects it to the battery. As the package includes every necessary installation accessories, it’s a pretty easy task to complete the installation within a few minutes.

However, the wiring seems to make the entire task much convenient. Compared to the pricing, the users get whatever they are supposed to have. Meanwhile, sometimes the red light seems to flash randomly that is a poor thing.

It’s a way brighter most of the users expect from a product at this price range.

More details you need to know

The light bar comes with a slim design that ensures more focus and concentration. Even if you are going through the most extreme weather condition, the lights can help you have a clear vision forward.

It comes with five blocks with different light patterns. The first and fifth blocks have amber light that shows turn signal light. However, the second and fourth blocks have red lights with brake lights.

Meanwhile, block third has white light with a reverse lighting function. The convenient in-line switch has easily turned on/ off to let the user have control all the time. With the 50,000 or above hours of lifespan, you will have extended performance.

Even though it’s raining outside, you can take the vehicle outside and have an off-road ride because of the IP68 waterproof rating.

The good

1. It powers up as soon as connected to the battery.
2. It effectively dissipates the heat and maintains a good temperature.
3. The waterproofing avoids moisture.
4. It offers eight different strobe light modes.
5. Universal fit and compatible with various types of vehicles.

The bad

Randomly flashes the red light sometimes.

How to choose the UTV chase lights?

It’s the hardest part of buying any accessories for off-road vehicles. After going through the products, it’s pretty clear what the lights offer. But do you know what you need to have in the chase lights?

Here are the things, you need to consider before purchasing any light bars for your UTV model.

1. The length should be somewhere between 20 to 43 inches.
2. Scratch-resistant and shatterproof, high-quality PC lens.
3. Aluminum alloy housing is better than ABS plastic.
4. IP65 to IP68 waterproof rating.
5. 12 volts DC operating voltage is recommended.
6. Amber, blue and red is the most common halo colors.
7. Three light types include turn signal, brake, and reverse.
8. Different strobe light modes with one solid color mode.
9. Double switches including inline and rocker.
10. The lifespan should cross 50,000 hours.
11. Mounting bracket, screws, cable, and instructions.

How long the lights should be?

Checking out the dimension of the light bar is the first thing you should do while buying these lights. Typically, the lights are 20 inches long. However, 30 inches lights are also available, and the rarest one is 43 inches.

These lights come in bars, and each bar can come in with five or six blocks. Moreover, you can find up to six LEDs in each of these blocks. Each of these two blocks provides similar color modes.

Are these chase lights long-lasting?

Yes, chase lights used on UTVs are long-lasting indeed. According to the manufacturers of these lights, they can serve for more than 50,000 hours. However, it comes with a waterproof rating of IP65 or IP67, or IP68, which makes it usable in any weather conditions.

It means the quality will remain as it was before even after going through a tough time. Again, the lens is scratch-resistant and shockproof. Meanwhile, the aluminum housing with powder-coating enhances the durability a lot.

You should stay away from buying cheap lights with ABS plastic housing.

What clarity do these lights offer?

You need to ensure a proper operating voltage of these lights that match the vehicle. Most of these lights have 12 volts of DC voltage. However, a few can also operate down to 9 volts and up to 30 volts, which are rare.

Moreover, it must have amber, blue and red color modes to ensure full area coverage. Amber light is typically for turn signals, red lights are used as brake lights and the blue one is for reverse lighting.

How much variety you will get in these lights?

Well, you will get quite a lot of variety in these lights as you move on to the switch. Typically, the lights have three working modes including brake, reverse and turn signals. Each of these modes has different colors.

Except for these modes and colors, you can enjoy from eight to twelve different color patterns depending on the light. But one solid light will always remain there with any light bar.

Is it easy to install?

If you aren’t going for a cheaper one, which is below the affordable price range, the installation may bother you a bit. However, a quality UTV chase light package includes everything you need for the installation.

The mounting brackets and a long wire or cable are two major inclusions here. Moreover, mounting screws, nuts, washers also come in the package to make the daunting task convenient.

Can anyone control the lights?

The majority of these lights have two different switches for proper control, an in-line switch and a rocker switch. In-line switches have one button to turn the light one and off. However, the other button is there to change the color patterns.

On the other hand, the rocker switch turns on the light by pressing it on way and turns it off by pressing on the opposite way. But you need to press down again to change the color patterns.

UTV chase lights cost

On average, the cost of UTV chase lights ranges from $70 to $100. However, the cost can get down to $60 and go up to $250 as well. If the lights provide a guarantee of universal fit, it will cost you more.

Moreover, the more color patterns and light modes it has, the costlier it will be. Meanwhile, these lights have light bars. The number of blocks available in the bars also makes a difference in the price.

FAQs

What colors do chase lights come in?

Well, chase lights for UTV can come in any color that is safe for off-road driving. However, it’s prohibited in some states to use red and blue individual or combo lights while on-road driving.

Chase lights are typically amber reflective lights with several color patterns. Yellow is supposed to safest option for safety on the terrains with turn signal and brake chase lights.

Which beam pattern is suitable for UTV chase lights?

It's unfamiliar terrain conditions that you need to get rid of through these UTV chase lights and make the trip safer. Therefore, the spot beam pattern turns out more suitable than the flood beam pattern.

Spot beam pattern goes down to the soil or snow, wherever you are riding. Moreover, it doesn’t create any obstacle for your fellow riders that can ruin their journey.

However, the flood beam pattern can also focus on the road but appears to be a disturbing one for riders on your back.

Are chase lights good in dusty or harsh driving conditions?

Chase lights are roof-mounted light bars and reflect amber lights. Therefore, it’s a good solution to let you ride safely in dusty and harsh driving conditions. There’s been another light with which you can light up the trail.

But without amber light reflection, the ray can’t go through the dust, fog, rain, or other harsh weather conditions. So the ideal choice to get your vehicle through these conditions is to use chase lights.

How to control these chase lights?

Most high-grade chase lights come with single or dual switches. The traditional switches have power on and off buttons. Also, it lets you change the color patterns provided by the manufacturer.

On the other hand, the lights may come with a rocker switch. Pressing the switch downward and upward, one can conveniently turn the lights on and turn it off. Also, changing the color pattern is possible here.

Can UTV chase lights work as brake lights?

UTV chase lights have different modes, and one of them is works as a brake light. When you are racing or going through trials, you may want to ensure safety. Without having tail lights it’s not possible.

However, if you already have chase lights installed on the vehicle, turn the brake light mode on and enjoy the ride.

Final verdict

What do you think of UTV chase lights? Are they handy or not? If the question is about your vehicle’s safety, they are handy anytime. The above discussion might have already provided the idea of how to choose the right light from the list.

1. Lights should have scratch-resistant PC lenses.
2. Aluminum alloy housing with powder-coating ensures durability.
3. Waterproof rating up to IP68.
4. A vast amount of color patterns and lights modes available.
5. In-line switch and rocker switch for easy control.