what are the differences among fox racing v1, v2, and v3 helmets?

We use affiliate links and may receive a small commission on purchases. Read more about us.

While MIPS (Multi-directional Impact Protection System) is common to all Fox  V1, V2, and V3 helmets, some other technical differences make each of the helmet types different from one another.

And that is what I am here to discuss.

The FOX Racing V1 is the essential helmet type that brings safety and performance to all riders.

The V2 is a mid-level helmet from Fox Racing that is loaded with some additional features than the V1.  

The V3 finally is the professional-graded helmet that brings maximum safety and protection but at a good price range.

Which one is for you? Let’s find out-

Fox Racing V1 vs. V2 vs. V3 helmets

Comparison between V1, V2, and V3 helmets

fox racing helmet user

Dirt bike helmet cost is not the first thing you need to consider while buying a new helmet. Off-road helmets must provide adequate safety to the rider all the time. V1, V2, and V3 are the three most preferable helmets from Fox Racing.

Check out the comparison chart below to know the similarities and dissimilarities between these helmets.

Fox Racing V1



Injection-molded polycarbonate and ABS shell construction

Injection-molded polycarbonate and ABS shell construction

MCT with carbon and FRP resins combination of shell construction

MIPS protection

Fluid inside protection

MIPS protection

MVRS visor

MVRS visor

MVRS visor

9 intake vents & 4 exhaust vents

11 intake vents & 4 exhaust vents

14 intake vents & 4 exhaust vents

Washable & removable padding and liner

Washable & removable padding and liner

Washable & removable padding and liner

Reinforced chin bar

Reinforced chin bar

EPP chin bar

If you need an ATV helmet under $200 or above, you can undoubtedly choose any of these three off-road helmets. Follow the following sections to know more about these items individually.

Fox Racing V1 helmet review

A quality helmet provides the optimum protection that you need for safe off-road rides. However, the V1 helmet from Fox Racing has successfully done the same thing within an affordable price range. For example, they introduced MIPS or Multi-directional Impact Protection System in v1.

It reduces the rotational impact when there are any unwanted accidents and reduces the chances of brain injuries. However, it was only available in expensive helmets. Let’s go through the main features of the helmet before moving further.

Key specifications of V1 helmet

  1. Lightweight injection-molded polycarbonate and ABS shell construction.
  2. Precisely fitting 4 shell and 4 EPS sizes.
  3. Nine air inlets with four air extractors.
  4. Includes Multi-directional Impact Protection System or MIPS.
  5. Visor with MVRS or Magnetic Visor Release system.
  6. Removable and washable comfort liner & cheek pads.
  7. Double buckle closure.
  8. Sizes are available from XS to 2XL.
  9. Meets ECE 22.05 and DOT certifications.

What users’ say about the helmet

The helmet seems pretty comfortable and supportive on the majority of users' heads. You may think it would be heavy on the head, but the actual result is the opposite. However, there has been a mixed reaction regarding the helmet’s sizing.

Most of the users have found it a little bit extra snug that hurts the forehead during a long ride. Therefore, it is suggested by them to go one size up while purchasing. On the other hand, users with small heads fount it perfectly fitted.

With the MIPS technology, the helmet meets the users’ demand properly. They can also easily remove the visor when they don’t need it anymore. Most affordable doesn’t allow the user to remove liner or padding.

However, the opposite thing happened with this one, and they found it helpful in long-term use. The ventilation keeps the rider’s head cool on hot summery days by extracting hot air and inserting fresh air.

More details about it

Compared to the price range, V1 is a superb choice for any off-road biker for adequate head protection. It has polycarbonate and ABS shell construction. The outer shell is lightweight and ensures proper protection during unwanted accidents.

The exterior is superbly functional as it has nine intake vents and four exhaust vents. It ensures optimum airflow through the vents by keeping the fresh air inside and removing hot air outside.

A large vent is available on the front downside with two more small vents above. Besides, one vent is designed on each cheek side. But the most noteworthy addition to the exterior is the easily removable MVRS visor.

The visor is connected to the helmet through a magnet, not screws. It lets the user remove it whenever it fails or gets damaged, or doesn’t need it anymore during the ride. Moving to the interior, it has removable padding and liner.

One can remove the cheek padding and liner to wash it whenever it’s necessary. However, the inclusion of MIPS has made the helmet a special one to the users. It reduces the risk of brain injuries.

Are Fox Racing V1 helmets good

Without any confusion, Fox Racing v1 helmets are good. The manufacturer added a MIPS system and MVRS visor to make it worth comparable to the expensive off-road helmets. It is hard to find such features in an affordable helmet.

  1. The MIPS reduces the rotational energy transmitted to the head.
  2. Easy to remove and attach the visor.
  3. Proper air ventilation guarantee.
  4. Adequate padding for long-lasting comfort.
  5. Remove and wash the interior padding.

MIPS technology comes in handy during an accident as it ensures fewer chances of brain injuries. Using the magnet, one can easily attach and remove the visor when needed. These few features are enough to provide V1 helmets good.

Fox Racing V2 helmet review

The better airflow, the more fun you will have riding on a dusty off-road. V2 helmet model from Fox Racing is praised for the ventilation it provides. It doesn’t matter whether you need frontal vents or rear vents, this helmet consists of all.

The fluid inside protection inside has made it worth comparable to the competitors. It provides ideal support to the users while rough driving. Like the previous version V1, it also has an MVRS visor for easy and convenient removal. Now check out the features below.

Key specifications of V1 helmet

  1. Lightweight injection-molded polycarbonate and ABS shell construction.
  2. Precisely fitting 4 EPS and 4 shell sizes available.
  3. The interior has fluid inside the system.
  4. Removable visor with MVRS.
  5. Equipped with eleven intake vents and four exhaust vents.
  6. Removable and washable comfort liner and cheek pads.
  7. Dual-density Varizorb EPS liner.
  8. Reinforced chin bar.
  9. Double buckle closures.
  10. Meets ECE 22.05 and DOT certifications

What users’ say about the helmet

If the helmet fits well, then it can serve you in the best possible way that is what most users said about this. It means you need to be careful choosing the size as a new buyer.

However, most buyers have a major complaint about this. It doesn’t come with a MIPS system, which was even available in the previous model from V series helmets. They are not sure about the safety measures of the fluid system as well.

Because of having a lot of vents in the front, top portion, and rear, users don’t get disgusted in long rides. They can also remove or attach the visor without any complications as it comes with MVRS.

More details about it

The helmet is good to go for an off-road ride if you need something with an extra ventilated design. It has one air vent in the front with two smaller ones just above. Moreover, you will get two vents on two sides of the cheek as an addition.

Even the upper portion of the helmet is equipped with air vents to remove the sweat and provide as fresh air as possible. The rest of the vents are available on the rear. It has injection-molded polycarbonate and ABS construction.

Although you might think it’s going to be heavier, it is not. The manufacturer used a Fluid protection system inside instead of MIPS in the helmet. Also, it has an MVRS system with a visor.

The magnetic visor lets you easily removable and attaches depending on the need. The inner padding has XT2 fabric construction. Both inner fabric and liner are removable and washable. Also, the double buckle closure keeps it properly fitted.

Is Fox Racing V2 a good helmet

Even if you ignore the other sides of the helmet, you have to admit the superb ventilation method. The inclusion of 11 intake vents with 4 exhaust vents does the job precisely and ensures comfort.

Here are some crucial aspects of the V2 helmet that prove how good it is for off-road rides.

  1. It has a lightweight construction.
  2. The visor is removable.
  3. Air vents constantly remove hot air and take fresh air in.
  4. The upper padding soaks the sweat.
  5. A fluid protection system keeps the head safe.
  6. The padding and liners are removable and washable.

To keep the newish look on the helmet, you need to take proper care. And the removable padding & liners make the process hassle-free. Feel comfortable during the ride as you won’t keep the sweat or hot air inside.

Fox Racing V3 helmet review

fox racing helmet user (1)

A perfect upgraded off-road bike that has MIPS and MVRS systems. What else do you need on an off-road helmet for safety? Proper ventilation, or washable padding, sweat-wicking construction, anything you need is present in the helmet.

The rest of the work is upon how well you use the helmet. According to the manufacturer, it is a true-to-size helmet, and you need to take a proper measurement of your head before buying. Look below to know what special the helmet offers.

Key specifications of V1 helmet

  1. MCT or Multi Composite Technology with carbon and FRP resins combination of the shell construction.
  2. Includes MIPS or Multi-directional Impact Protection System.
  3. Removable visor with MVRS or Magnetic Visor Release System.
  4. 4 interior EPS and 4 shell sizes.
  5. Dual-density Varizorb EPS liner.
  6. EPP chin bar with double buckle closure.
  7. X-Static fabric inner padding.

What users’ say about the helmet

The users are happy with what it offers within this affordable pricing, especially the inclusion of MIPS again. Although the previous model doesn’t have MIPS, the manufacture brought it back in this model again.

The relentless riders on the off-roads have found this feature helpful as they can assure extra protection. With the MVRS system, they can also remove or attach the visor depending on the need.

The lower, upper, side, and rear air vents are good to ensure the comfort one is looking for in a long riding session. Another lovely thing is that it offers the users to remove the inner padding and liner to wash them when it’s dirty.

More details about it

The helmet comes with a different construction as the manufacturer used MCT technology here. It blends carbon and FRP resins to form a lightweight, but rigid shell construction. It has a lot of air vents in lower, side, upper and rear positions.

It has MIPS technology to ensure a low-friction performance between the head and the helmet. It also protects the head while there is an unwanted accident. Moreover, they have added an MVRS visor.

It is a handy addition for those who need to remove and attach it regularly. The dual-density EPS liner has broadened the protective structure. Along with the EPP chin bar, they form a protective design inside.

Is Fox Racing V3 helmet beneficial

Yes, indeed. The V3 helmet is the most recent inclusion in off-road helmets from Fox Racing. The outlook is not only eye-pleasing, but the helmet is highly functional to serve the users. You can go and have a long ride without any worry about putting on this helmet.

Here are the benefits one will get by wearing the helmet while off-road rides.

  1. The MIPS technology reduces head injuries.
  2. EPS liner and EPP chin bar protect the interior.
  3. It offers adequate ventilation.
  4. Ensures a snug fit with the double buckle closure.
  5. Allows easy removal and attachment of the visor.
  6. The inner padding and liners are removable and washable.

Final words

Ensure safety first and then go on to the next off-road ride without thinking twice. Putting on one of these three V series helmets is necessary for safety because,

  1. Has MVRS visor.
  2. MIPS head protection.
  3. Proper ventilation through intake and exhaust air vents.
  4. Double buckle closure provides a perfect fit.
  5. Removable and washable interior padding.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *