Polaris General Windshields review: Which one is Best for your ATV

When you are roughly riding on the terrains, dirt, debris, flies, or rocks can create an obstacle to your vision. Even it can severely injure the eyes, which can ruin the entire trip. An ATV windshield can make the off-road ride safer.

However, when you have Polaris General ATVs, you can go for both full-size and half windshields. Polycarbonate shields will go on to serve in a better way compared to glass or acrylic ones. Also, the hard coating extends the durability.

The following list contains the top six windshields for Polaris General Models. The list begins with SuperATV Full Windshield for 2016+ Polaris General, and you should read out the entire article to know more about these products.

best polaris general windshields

Should I put a windshield on Polaris General ATV?

Why shouldn’t one put a windshield on a Polaris general ATV? Well, I find no valid reason for not using windshields on ATVs. There are a lot of benefits a rider can get from it.

If you are thinking it's only a protective addition, you are wrong. Here are the reasons why you should go for a windshield. You may also like to read about Can am windshields.

  1. It keeps the rocks and limbs away.
  2. Protects the eyesight from dirt, dust, debris, and flies.
  3. UV-protected ones protect from excessive sunshine.
  4. A perfect safety addition for rough riding.
  5. Ensures maximum clarity while driving.
  6. The half windshield provides adequate airflow.
  7. Allows folding down when it’s not required.

It’s not the case that you need to use the windshield all day long. If it’s warm outside, and the sun is shining greatly, you should fold it down to have proper airflow. Moreover, it’s a handy addition if the shield has UV protection.

Now, don’t you think this versatile windshield is worth usable on ATVs?

Best Polaris General windshields

Maybe, you are thinking to go for a complete protective windshield that comes in full-size. However, you also need that can fold down and provide enough airflow under the scorching sun. Probably, you should go for one with both these features.

In the list, most of the windshields have polycarbonate construction. Moreover, some of these shields have a foldable design that provides continuous airflow when it’s needed. But you should go for one that is easy to install.

Now let’s go through the list first before moving further.

1. SuperATV Full Windshield for 2016+ Polaris General

SuperATV Full Windshield for 2016+ Polaris General

Key specifications

Brand

SuperATV.

Weight

19.41 pounds.

Construction material

 Non-scratch resistant and shatterproof polycarbonate.

Coating

Proprietary XR optic hard coating.

Thickness

¼ inches thick.

Usability

On both soft and hard tops.

Perfect fitment

Full-length rubber bulb seals and secure clamps.

For installation

Necessary hardware and instruction.

Fits to

Polaris General 1000 (2016) and Polaris General 4 (2107).

Users opinion about the windshield

It is quality ensured products according to the price segment. A few users have complained about the non-scratch-resistant design, although it’s available in the description of the product.

Except for it, the windshield takes no time to get installed on the Polaris models. So far, no users have found any issue with the fitment as it fits perfectly.

Again, it feels great on the 2016 and 2017 Polaris General models. Although it’s a cheaper shield for protection, it successfully keeps the wind away to stop making the off-road trip annoying.

More details you need to know

The non-scratch-resistant windshield can keep the rider safe from the rocks and limbs while riding. The manufacturer has used a super-strong polycarbonate construction to make the shield. Also, it comes with an XR optic hard coating for durability.

The windshield appears as a safety feature in windy, snowy, or rainy conditions. Even though it’s not scratch-resistant, it offers a good amount of UV resistance. The riders can notice there aren’t any yellowing, fading, or sunspots on the windshield.

According to the manufacturer, you can use it on both hard and soft tops. It is ¼ inches thicker that protects the rider from any kind of dirt and debris throughout the ride.

It ensures a great fit for the Polaris models with the full-length rubber seals and secure clamps. In the package, you will get the necessary installation hardware and instruction that eases the entire installation process and provides more riding time.

Also, you can instantly remove it within a few minutes if the weather is favorable and you need more air. With the snug and rattle-free fit, the shield won’t let any elements on the edges.

Pros

  1. It keeps the wind off the rider.
  2. Provides a hassle-free installation with the hardware and instructions.
  3. Applicable on both hard and soft tops.
  4. Fits perfectly on the Polaris ATV models.
  5. It keeps the shield safe from fading or yellowing.
  6. Ensures extra durability with XR optic coating.

Cons

The windshield isn’t scratch-resistant.

2. SuperATV Heavy Duty Scratch Resistant Flip Windshield Polaris general

SuperATV Heavy Duty Scratch Resistant Flip Windshield polaris general

Key specifications

Brand

SuperATV.

Weight

36 pounds.

Construction material

Scratch and shatter-resistant polycarbonate.

Thickness

¼ inches thick.

Coating  

XR optic hard coating.

Usability

Usable on most hard and soft tops.

Fitment

Polaris general XP 1000 and XP 4 1000.

Installation

Comes pre-assembled.

Users opinion about the windshield

The windshield is easy to install, although you need to know to remove the dash cover. However, it is a scratch-resistant shield that lasts longer for off-road support. Moreover, the thickness is enough to withstand any off-road obstacle.

The users are satisfied with the hardness it offers. As it’s a windshield, it ensures protection from the rough windy conditions in all-weather. The versatile all-weather usability makes it a perfect choice for terrains.

More details you need to know

If you are searching for support throughout the whole year on terrains, you should probably spend your valuable dollars on this windshield. The manufacturer used ¼ inches thick polycarbonate to construct the shield.

It is scratch-resistant and shatter-resistant at the same time. According to the manufacturer, you can close, keep it vented or fully open it depending on the comfort level. Keeping it open means you can get extra airflow when it's too hot outside.

Moreover, the polycarbonate construction appears as a long-lasting construction. It is way stronger than both glass and acrylic windshields. Furthermore, the shield is equipped with a proprietary XR optic hard coating for extended durability.

It fits the contours of your ATV’s cage and hood perfectly. Well, you don’t need to worry about the installation here as it comes pre-assembled. As a result, the user finds more time to enjoy the off-road trip with comfort.

The shield is usable on two Polaris General Models that include XP 1000 and XP 4 1000. Whether the ATV has a hardtop or a soft top, you can always make it fit there. However, if you install it on models with defrost, the vents will partially get blocked.

Pros

  1. No need to install it as it comes pre-assembled.
  2. It fits ATV’s hood and cage perfectly.
  3. It is suitable for most hardtops and soft tops.
  4. You can get maximum airflow when the shield remains open.
  5. Scratch-resistant and shatterproof for better durability.

Cons

So far, it seems a pretty good product.

3. Ryfab Folding Glass Windshield Black for Polaris GENERAL

Ryfab Folding Glass Windshield Black for Polaris GENERAL

Key specifications

Brand

Ryfab.

Weight

-

Construction material

Single pane, DOT laminated safety glass.

Design

Full-size, foldable.

Folding down mechanism

Entire panel hinges.

Inclusions

Forward mounted & shock absorbing brackets.

Installation

Quickly bolts into the cab frame.

Certification

From DOT.

Users opinion about the windshield

The foldable design makes this windshield a worthy choice for off-road riders. However, the users have complained about the shield being glass-constructed. It could have served in a much better way if it came with polycarbonate construction.

With mounting brackets and necessary bolts, the installation process seems quick and hassle-free. It allows the riders to get ready for a safer off-road trip within a quick time. In terms of clarity, the shield is way clear for the rider to have a forward vision.

More details you need to know

You may have gone through a few quality windshields that slide down when you need airflow other than protection. However, this appears to be a bit upgraded as it folds down for maximized airflow.

With the quick hinge mechanism, one can fold it down whenever it seems necessary. However, the full-size shield also provides adequate protection on the terrains from any kind of dirt and debris.

The manufacturer has used single pane, laminated glass to construct it. Although you might worry whether a glass windshield is ideal for protection or not, you actually don’t have to. The glass comes with DOT certification for better support.

For a quick and hassle-free installation process, you will get a forward-mounted and shock-absorbing bracket. Also, the manufacturer has added installation bolts in the package that attaches to the cab frame for enhanced installation.

Whenever you are worried about the safety of the product, you need to think about DOT certification. They certified it’s safe to use on terrains even in the roughest weather condition. To clean the shield, you need a clean, soft microfiber cloth and wipe it down.

Pros

  1. The shield folds down and offers maximum airflow.
  2. Easy to install using the mounting brackets and bolts.
  3. The laminated glass comes with DOT certification.
  4. The full-size design offers proper protection from terrain dirt.

Cons

Not seem as strong as polycarbonate windshields.

4. EMP P/N 13083 Polaris General Front Windshield

Key specifications

Brand

Extreme Metal Products (emp).

Weight

13.12 pounds.

Construction material

Durable polycarbonate.

Coating

Hard coating on both sides.

Fits to

2016 Polaris ATV model.

Installation

Tool-less removal and installation.

Color

Clear.

Certification

DOT rated and etched.

Users opinion about the windshield

The performance of the windshield on specific Polaris ATV models is more than satisfactory. According to most users, you can install it within five minutes. Moreover, it perfectly fits the installed vehicle model for efficient protection.

Being hard-coated and anti-scratch, it ensures durability to a great extent. However, none of the users have so far found it tough to clean or take care of. Even after installing it, the outer view appears as clear as you would have expected.

However, a few users have complained about the windshield being scratchy. Also, the packaging doesn’t seem top-level anything.

More details you need to know

Well, it’s a great thing if you don’t need any tools to install and remove the windshield. That is what you will get in this particular windshield from emp. The manufacturer has used hard-coated, durable polycarbonate for construction.

Hard-coating on both sides of the shield makes it highly durable. Where most other shields have acrylic construction, it comes with the most durable one with polycarbonate construction. It is contoured that helps to provide a perfect fit on the ATV.

According to the manufacturer, it fits Polaris General Models from 2016. It comes DOT rated and etched to ensure proper safety. Coming back to the installation, the shield doesn’t require any kind of drilling or cutting tools for the entire installation process.

You need to spend a few minutes to get the installation process run and then you are fully ready for the ride. By installing the shield, you can stop dust and swirl getting inside the vehicle. Ultimately, one can get a safe and sound journey.

Although it has polycarbonate construction, it can also work with factory plastic top according to the manufacturer.

Pros

  1. Offers a tool-less installation within a few minutes.
  2. Reduces dust and swirl getting inside the vehicle.
  3. Fits perfectly with Specific Polaris general models.
  4. Even continuous wiping doesn’t create any scratch on it.
  5. Blocks the wind for a pleasant ride.

Cons

It doesn’t remain scratch-resistant for much longer.

5. SuperATV Non-Scratch Resistant Clear Rear Windshield

SuperATV Non-Scratch Resistant Clear Rear Windshield

Key specifications

Brand

SuperATV

Weight

23.9 pounds.

Construction material

Non-scratch resistant and shatterproof polycarbonate.

Thickness

¼ inches thick.

Fits to

Polaris General 4, Polaris General 1000, Polaris General XP 1000, Polaris General XP4 1000.

Made for

Both rear and front.

Usability

On most soft and hard tops.

Protection

From chemical and UV attacks.

Installation

Includes all hardware and instructions.

Users opinion about the windshield

Most users have agreed to the fact that installing the windshield is not a daunting task. However, a few users have faced a bit of problem regarding the fitment. According to them, it doesn’t fit perfectly.

Even if it fits perfectly on the Polaris model, you can raise or lower the bed. However, it has a handy feature that allows the user to install it on both rear and front positions according to the need.

To make the installation process hassle-free, the manufacturer included all necessary hardware and instruction. It comes out as the most usable part of the shield.

More details you need to know

This is the third windshield from SuperATV on this list. Likewise, the other three products also come with durable polycarbonate construction. It is ¼ inches thicker and shatterproof. However, it’s not scratch-resistant.

According to the manufacturer, it fits Polaris General from 2016, Polaris General 4 from 2017, Polaris General XP 1000 deluxe from 2020, and Polaris General XP 4 1000 deluxe from 2020.

Moreover, you are allowed to install it on most soft and hardtops. However, it is recommended to install it on the stock roll cage. Again, it is not appropriate to be installed on Rockford Fosgate stage-4 audio system.

The package is completed with all necessary mounting hardware and instruction. As a result, the entire mounting process becomes hassle-free. The shield creates strong protection against chemical and UV attacks. It fits the unique contour of the machine’s cage.

Pros

  1. It is easy to install with the necessary hardware and instructions.
  2. Provides strong protection from chemical and UV attacks.
  3. The thickness makes it highly shatterproof.
  4. Strong polycarbonate construction provides enough durability.
  5. Usable on both rear and front panels.

Cons:

It’s not a highly scratch-resistant windshield.

6. POLARIS RZR GENERAL EPS 1000 half WINDSHIELD

Key specifications

Brand

A&S Audio and Shield Designs.

Weight

220 pounds.

Construction material

Polycarbonate and stainless steel

Bolts

3/16 inches stainless steel bolts.

Fitment

2016 to 2017 RZR 100 General seater models.

Installation

Requires no drilling.

Design

Half polycarbonate.

Users opinion about the windshield

The users, who were searching for an affordable windshield for all the way long protection found it helpful. However, the windshield turns out as a bit flimsy one for a few users. It works great as a half windshield providing proper airflow and safety.

However, the windshield doesn’t go inside the grooves where it should have gone. The users are pretty satisfied with the installation process. You literally need no kind of drilling to complete it.

Furthermore, it saves a lot of time and makes you ready for the trip for having fun with safety and comfort.

More details you need to know

Compared to the other products in the list, this windshield is a bit different as it comes as a half windshield. The manufacturer used clear polycarbonate to construct it. The reason behind the clearness is the polycarbonate construction.

Moreover, it has stainless steel construction for a convenient installation process. Talking about the installation, it needs no drilling that makes the entire process hassle-free and convenient. Except for specific ATVs, it is compatible with UTVs as well.

However, the windshield is 3/16 inches thicker that is enough to provide a whole day's protection on the terrains. According to the manufacturer, it is compatible with Polaris RZR General EPS 1000, General 4 1000 EPS from 2016 to 2017.

Pros

  1. A perfect half windshield that provides proper servicing.
  2. Works greatly on the specific ATV models.
  3. Easy to install as it requires no drilling.
  4. Compatible with UTVs too.
  5. Polycarbonate shield provides extra clarity in vision.
  6. An affordable windshield option. 

Cons

Seems a bit flimsy.

How to choose a perfect Polaris General Windshields?

Polaris general windshield

Which one of the listed windshields you need is totally up to you. But you can’t buy any of these just by having a look at them. It doesn't matter from which brand you're buying this or what it offers, there are some basic considerations you need to know.

Unless you are purchasing a proper windshield according to your needs, it will only turn into a waste of money. Check out the things you need to consider before buying one.

  1. Look for a windshield with polycarbonate construction.
  2. It should have a hard coating on both sides.
  3. Scratch resistance and shatterproof construction.
  4. Typically, ¼ inches thickness is recommended.
  5. Check out the compatibility.
  6. A hassle-free installation process.
  7. Usable on both soft and hardtops.
  8. Try going for one with both full-size and half-size designs.

How crucial is the construction of a windshield?

Typically windshields come in three different constructions, polycarbonate, glass, and acrylic. The high-grade ones have polycarbonate construction, and it's the strongest one as well. Moreover, a quality shield should consist of coating on both sides.

On what things the durability depends?

The construction material is the first thing on which the durability depends. However, you can have better durability on the scratch-resistant and shatterproof windshield. It withstands even the roughest off-road conditions.

However, some polycarbonate shields also have non-scratch-resistant construction. For enhanced durability, one shouldn’t go for one without scratch resistance.

How thicker a windshield should be?

The thickness of the windshield can range from ¼ inches to 3/16 inches. However, the most usable thickness is ¼ inches. The thickness plays a crucial role to extend durability as well as protection.

A thicker shield can withstand when any small rock hits it. Especially, the rough riders on the off-roads find it handy any time.

To which models is it compatible?

Checking out the compatibility is another important part before you purchase any windshield. Here, you are looking for windshields for Polaris General ATVs. Therefore, the first compatibility should be this particular model.

On the other hand, it can fit further models as well. Another noticeable thing is that the windshield should fit on both hard and soft tops.

Do you need to easy to install a windshield?

The ease of the installation depends on two things. The first one is the package must come with all necessary installation hardware. And the second one is the installation instructions.

The inclusion of hardware allows you not to drill or cut anything and have a quick installation process. Moreover, the instruction allows you to understand the correct process to install.

Are you looking for affordable Polaris General windshields?

If you are looking for an affordable windshield for Polaris General you might get one. The cost of these windshields ranges from $170 to $620, which means both cheap and expensive products are available.

However, an affordable one means it has either glass or acrylic construction. And as most of you know that polycarbonate is far stronger than these two materials. Also, it will last longer providing better support with the hard coating.

In other words, you might have to cut the quality, performance, and safety if you go for an affordable windshield.

How to clean a Polaris General windshield?

It’s not that tough to clean Polaris General windshield if you know the correct process. Follow the instructions given below to properly clean it and increase its longevity.

For the whole cleaning, you will need a bucket of water, warm water mixed with detergent or soap, a soft microfiber cloth, a dry cloth, a sponge, etc. You should also know about how to remove scratches from ATV windshields.

  1. Rinse the entire shield with water to remove the dirt and dust.
  2. Take the warm water with detergent.
  3. Damp the microfiber cloth into the warm water mixture.
  4. Wipe down the shield surface using the cloth.
  5. Use a dry cloth to make it dry.
  6. You should use a sponge to clean any spots on the surface.

FAQs

Is polycarbonate windshield stronger than glass?

Yes, a polycarbonate windshield is way stronger than glass. According to experts, polycarbonate is 250 times stronger than glass. Moreover, it’s 25 times stronger than acrylic as well.

So if it comes to the strongest windshield material, polycarbonate will always remain on the top position without any doubt.

How to protect Polaris General Windshield from scratching?

Most polycarbonate windshields come with a hard coating on both sides. The XR optic hard coating can provide a good bit of protectiveness from scratching. However, you can also manually put dip coating to ensure an anti-scratch windshield.

Which type of windshield is ideal, half or full?

Well, both of them are ideal when it meets your demand and the situation. When you are going through a rough, windy track, you should go for a full-size windshield. It provides complete protection.

However, the half shields are ideal for hot weather conditions. For better airflow, these types of windshields come in handy. Well, you can get both these features in the same shield as well.

How long does a Polaris General Windshield last?

The lifespan of the windshield depends on how regularly and properly you take care of it. After every ride, you should go for a cleaning with the given process above. It can extend the lifespan and provide much clarity on the terrains.

Final summary

You can’t ignore the importance of windshields while you are going through risky terrains. However, not every shield serves you in the same way. That is why the above list offers you several types of windshields to choose from.

  1. Polycarbonate surface works better than glass or acrylic.
  2. ¼ thicker shields are the ideal ones.
  3. Includes installation hardware and instruction.
  4. A few provide foldable designs.
  5. XR optic hard coating increases durability.

Last Updated on June 17, 2022 by sajjad

Leave a Comment

Your email address will not be published.