Best Tesla license plate frames: The way to protect your registration plate

To show the legality of the car, a license plate appears as the most useful addition to your vehicle. But it seems hard for you to find the right license plate frame for your owned Tesla model.

Not every frame has a glossy look that enhances the vehicle’s experience. Even, not every one of these frames can support you in all weather conditions. Therefore, you need an ideal one that can protect the registration plate.

Aluminum and stainless steel are two of the most common metals in these frames. However, you can go for either a matte or glossy finish. But don’t purchase one without going through the buying guide.

Best tesla license plate frame

Types of Tesla license plate frames

It’s not that easy to classify license plate frames, because several factors can make the classification. The main difference between these frames happens because of the design and installation.

Depending on the design, you will find three different types of frames.

  1. Slim-line plate frame that comes with simple rounded edges design.
  2. The semi-wide frame has a bottom space for the nameplate.
  3. The wide frame has a wider space for name-plates.

Moving on to the installation, you will get two different types.

  1. Two holes, which have two holes on the top part. You may get a bit rattling in such frames.
  2. Four holes design having two holes up and two holes down. It provides the most perfect fit.

Best Tesla license plate frames

Don’t you think a license plate frame is a useful addition for Tesla? Well, you should install one in the rear or front to keep the registration plate safe and protected. Therefore, we’re here to provide you with a list of the top seven frames.

1. ThatGrin Genuine Slipstream Bracket for 2021-2017 Tesla Model 3

Key specifications

Brand

ThatGrin LLC

Weight

1.5 pounds

Construction material

Aircraft-grade aluminum, stainless steel fasteners

Installation

Two clicks with two security screws

Compatibility

Tesla model 3 from 2017 to 2022

Fit

Vehicle specific fit

Finish

Soft edges sealed in a protective baked-on finish

Protection

7-point paint safe and grille safe protection

Color

Textured black with powder coating

Users experience after using it

According to the users, the frame will last longer because of the high-quality construction. It’s an easy-to-install frame that includes every necessary fastener required for installation. For a front license plate, it does the property.

It turns out as a reliable plate holder that doesn’t provide any rattling or lose fitting while driving the car. Moreover, the frame is a good choice to prevent the user from drilling holes on the front bumper.

Overall, it looks great with the license plate. However, a few users have found issues regarding the fitment.

More details about the product

The manufacturer has used top-quality, aircraft-grade aluminum to construct the frame. It comes with a one-piece design. With the strong construction, it possesses less chance of breaking in the long run.

It also has a black powder-coat finish for rust resistance. To make the entire installation process hassle-free and time-saving, the package includes stainless steel fasteners. Being stainless steel construction, they are not prone to rust.

Whether you have model 3 from Tesla that released within 2017 to 2022, you can install the frame there. Also, it is compatible with the newest model Tesla model 3 refresh.

The buyer needs not to drill any holes or require any adhesive for the installation. You can securely place it with two clicks and two security screws. It comes to maintaining the quality with soft edges sealed in a protective baked finish.

Things we liked

  1. The installation requires drilling no holes and no adhesives.
  2. It takes less than 30 minutes for the installation.
  3. Looks great in the front of the vehicle.
  4. Both the frame and fasteners are highly rust-resistant.
  5. The frame is not prone to breaking.

Things we disliked

There’s a slight issue noticeable with the fitment.

2. Interesting car 2-Pieces High-Grade License Plate Frame for Tesla

Key specifications

Brand

Interesting Car

Weight

6.7 ounces

Construction material

Stainless steel

Finish

Beautiful matte black finish

Fit

Vehicle specific fit

Number of frames

Both front and rear frames

Installation

Install without any modification

Inclusions

Screws, spacers, caps & screwdriver

Users experience after using it

The package has everything except for the frames to provide a quick and hassle-free installation process. It fits perfectly to the rear and front of the vehicle. However, one common complaint from the users is that it doesn’t fit perfectly with Tesla model 3.

After installation, it looks great on the car enhances the beauty and look. The inclusion of a screw cap makes it a good finish on the frame after installation. However, the users aren’t satisfied with the pricing.

Moreover, the screws sometimes don’t seem to fit the holes of the frames.

More details about the product

If you have a 6 by 12 inches license plate, you can properly fit this frame to protect the plate in the long run. The manufacturer has used stainless steel construction with a black matte finish on the frame.

It comes almost ready to install as the package includes everything you need for the installation. In the package, you will get both rear and front frames. Moreover, it comes with four fasteners, eight screws, eight washers, and eight caps.

To tighten the screws after installation, you will get a tightening screwdriver. It makes you feel comfortable with the matte finish on the outer surface. The high-quality construction prevents the frame from rusting, corroding, easy damaging.

Moreover, the license plate frame installs quite fast and quickly using the installation kits.

Things we liked

  1. The frame is easy and convenient to install.
  2. It fits properly to the license plate without any rattling.
  3. The package includes all necessary installation hardware.
  4. It provides a perfect installation with the caps.
  5. Comfortable feel with the matte finish.

Things we disliked

The screws don’t fit well every time.

3. Carsport 2 Pcs Premium Black Aluminum Alloy License Plate Frame

Key specifications

Brand

Carsport

Weight

5.8 ounces

Construction material

Aluminum with a thick-coated finish

Fitment

Universal fit

Compatibility

6 by 12 inches license plate

Inclusion

All installation hardware

Extra quality

Durable, and tough

Resistance

Wear-resistant

Users experience after using it

The frame fits correctly to the license plate with the screws. But the majority of the users have issues with the screws that don’t provide a proper fitment. You may not find the screws perfectly sized for a perfect installation.

However, the installation process is fast and accurate because of the inclusion of necessary installation hardware. One of the major problems of the frame is having less lifespan. It’s a cheaper frame that won’t serve you in the long run.

More details about the product

If you have a 12 by 6 inches license plate and searching for a frame to make it fit on the car properly, you are at the right place. According to the manufacturer, the frame comes with a black aluminum alloy construction.

Moreover, it has a thick-coated finish on the surface. Therefore, the frame doesn’t come in contact with rust or damage easily. It’s a complete package that includes all necessary installation kits. The buyer needs to worry for a single second regarding the installation.

In the package, you will get two black license plate frames for both the front and rear panels of the car. Also, it has four machine screws and four self-tapping screws. To make the fitment more efficient, it has six washers and six screw covers.

However, you can tighten the fitting of the screws using the screwdriver that is available in the package.

Things we liked

  1. The installation of the frame upgrades the vehicle’s appearance.
  2. It fits correctly with the provided screws.
  3. The thick coating provides enough durability.
  4. It provides a universal fit guarantee.
  5. Comes in a complete package.

Things we disliked

The screws size isn’t appropriate.

4. LXXX 3D Black Metal Sturdy License Plate Cover Fream for Tesla

Key specifications

Brand

LXXX

Weight

8.4 ounces

Construction material

Heavy-gauge metal

Plate measurement

12 by 6 inches

Inclusions 

Stainless steel screws and matching screw caps

Resistance

UV-resistant

Durability

Withstands all weather conditions

Installation

Both front and rear panel

Users experience after using it

Unpack all the installation kits from the package and enjoy a rapid installation service. On average, it won’t take more than five minutes for the entire installation process. Although it’s suitable on both the rear and front, it looks marvelous on the front side.

The quality of the frame is worth the price. Moreover, it adds beauty to the car after installation. One major downgrade of the frame is the thinner construction, which decreases the longevity.

More details about the product

If you need a stylish frame and want a durable one at the same time, you should have look at it. According to the manufacturer, it fits 12 by 6 inches license plates efficiently. It comes with heavy-gauge metal construction.

However, the manufacturer has added a UV resistance feature to let you get the best result out of it. Being a durable one, it comes with the capacity to withstand all weather conditions. Therefore, the user needs not to worry about how bad the weather is outside.

Again, you will get a complete package not only the frame here. If you have a screwdriver, you can do the entire installation process within a few minutes. Moreover, the package has screw caps to provide a finishing touch to the installation.

With the exquisite Tesla pattern logo, it becomes a great decorative addition to the car.

Things we liked

  1. It takes only five minutes for installation.
  2. Provides a decorative look to the car’s front.
  3. Comes with a complete installation kit.
  4. UV resistance for a long-lasting service.
  5. It is usable in all weather conditions.

Things we disliked

The frame seems a bit thinner and flimsy.

5. Fit for Tesla 3D Metal Logo Black Metal Sturdy License Plate Cover Frame

Key specifications

Brand

Sparkle-um

Weight

8.1 ounces

Construction material

Long-lasting, durable stainless steel

Plate measurement

6 by 12 inches

Resistance

UV and rust resistance

Durability

Usable in all weather conditions

Inclusion

Screws, washers, universal screw cap

Installation

Ten minutes

Users experience after using it

It gives a classy and gorgeous look to the car after installing the frame. With the emblem logo, the beauty of the frame increases to a top-level. However, it’s not amongst the most durable product, which is a bad thing.

However, most of the users have found it easy to install as the package includes everything that is required for the installation. You probably won’t have to spend more than ten minutes to complete the installation.

If you have no problem with its shorter lifespan, you can go for it.

More details about the product

The manufacturer used high-quality and durable stainless steel to construct this plate frame. Also, the frame has a UV-resistant coating that allows you to use it in any condition. Moreover, it’s a rust-resistant frame as well.

It’s a complete package that includes screws, washers, and other installation kits. According to the manufacturer, you can have a quick and hassle-free installation process that won’t take more than ten minutes.

Except for the license plate, you will find four self-tapping screws, four machine screws, eight matching universal plastic screw cap covers, and eight plastic washers. To have the most ideal fit, you need a 12 by 6 license plate.

To add a decorative effect to the car, the manufacturer has added an MB logo emblem on the frame.

Things we liked

  1. It maintains a clean appearance as it doesn’t rust or tarnish.
  2. It is easy to install within ten minutes.
  3. You can have an improved classy look on the car after installation.
  4. The frame is lightweight but stronger.
  5. UV resistance for durable service.

Things we disliked

The washers and cap covers have cheap plastic construction.

6. ACS Composite Tesla Model S 3 X Y License Plate Frame

Key specifications

Brand

ACS Composite

Weight

-

Construction material

ABS plastic composite

Finish

Carbon flash black finish with glossy finish

Inclusion

Two black head screws

Compatibility

Tesla model S, 3, X, and Y

Appearance

Rounded edges for better appearance

Fitment

Universal fit

Users experience after using it

The most loved side of the frame is that it won’t rattle even if you drive the car recklessly. Most users have found it easy to install and ensure a proper fitting. Moreover, it is compatible with four different Tesla models, which is a nice thing.

Again, the users have improved the car’s appearance with the rounded edges of the frame. There aren’t literally any major or minor issues in the frame. Moreover, the inclusion of two screws eased the entire installation process.

More details about the product

The manufacturer used high-quality ABS plastic composite material to construct the frame. Moreover, it comes with a glossy appearance because of the glossy finish on the outer surface. It has a carbon flash black finish on the plastic surface.

According to the manufacturer, you can make the frame fit to 3, X, S, and Y Tesla models. Moreover, it comes with a universal fitting option that relieves you from another stress regarding the installation. Furthermore, it provides a hassle-free installation.

In the package, you will get two black-head screws that allow you any time to install the frame and get the car going. Especially, the attractive and glossy finish creates a distinctive and elegant look on the license plate.

Things we liked

  1. The frame holds the license plate perfectly on the car.
  2. It is compatible with several Tesla models with the Universal fit.
  3. Two black-head screws ease the entire installation process.
  4. The car gets an attractive and glossy appearance.
  5. It is easy to install.

Things we disliked

So far, the product is a good one to use.

7. Moto Frame Tesla Chrome License Plate Frame Tag Blue

Key specifications

Brand

Moto Frame

Weight

-

Construction material

High-quality, weatherproof vinyl cut  

License plate size

12 by 6 inches

Mounting

Two holes for mounting

Installation

Quick and simple

Logo

Embedded Tesla logo

Weatherproofing

Usable in all weather conditions

Users experience after using it

For most users, it turns out to be a simply designed, easy to install frame. After installation, it keeps the mark of the Tesla with the logo at the bottom of the frame. None of the users so far found it tough to install it.

No matter what the condition is outside, you can always go out in the car and have fun. The weatherproofing construction is another lovely addition to it. Again, it ensures a durable performance with high-quality construction.

More details about the product

You may be tired of searching for a weatherproof frame that can go on to serve you any time. However, you may not still have gone through this product, which has a completely weatherproof and high-quality construction.

The quality vinyl cut design makes it worth choosing for most buyers. The manufacturer has added two drilled holes on the top that helps one install it without much hesitation. It is compatible with any 12 by 6 inches license plate.

Also, it has a silver-tone glossy finish that enhances the beauty of the car plate after installation.

Things we liked

  1. It comes to maintaining the quality.
  2. Provides an easy installation process with the pre-drilled holes.
  3. Enhances the framed beauty with the blue logo.
  4. Weatherproofing construction for extended longevity.

Things we disliked

It rattles a bit because of not having screw holes at the bottom.

Buying guide: Choosing the right Tesla license plate frame

Buying a license plate frame for style, and buying one for proper service is not the same thing. You can purchase one seeing the glossy outlook without knowing the resistance, and durability.

Therefore, you should go through the following aspects that can ease the buying process a lot. Also, it will ensure that you purchase the right product that you need.

  1. Stainless steel, aluminum, carbon fiber frames are better.
  2. A thick powder-coated finish can provide rust resistance.
  3. UV-resistant and all-weather construction.
  4. 6 by 12 inches license plate compatibility.
  5. Universal fit frames are always on top.
  6. Go for 4 pre-drilled holes over 2 holes.
  7. A complete package with all installation kits.

Which material is the most durable?

Basically, stainless steel, aluminum, carbon fiber are the three most durable frame constructions. Among these three, stainless steel provides the most versatile design. You can have both glossy and matte finish on these frames.

Except for these three materials, you can have plastic or composite frames. To be honest, neither plastic nor composite will last much longer.

Do you need a rust-resistant frame?

A thick powder-coating finish on any frame can make it rust-resistant. It’s the thickened coating that creates an extra layer that prevents oxidization on the outer surface. Therefore, the frame stays safe and provides longevity.

How could you take out the car in the rain?

If the frame has a weatherproof design, then you need not worry whether it’s raining outside or not. A weatherproof frame won’t get damaged in the roughest weather condition.

Moreover, UV resistance is another crucial feature. UV resistance keeps the frame all-time usable.

Isn’t it necessary to check out the compatibility?

Most manufacturers construct the frames for 12 inches 6 inches plates. However, you also need to go through the compatibility of the vehicle. Most frames are compatible with a single Tesla model.

However, a few plates provide universal fitting. Thus, these frames become compatible with several Tesla models.

Can you install the frame within a few minutes?

Yes, if the frame comes with all necessary installation kits. The package should have screws, washers, caps, etc. These things are a must when you need to complete installation within a few minutes.

How much does a license plate frame cost?

On average, the cost of license plate frames for Tesla ranges from $20 to $30. You may not believe it, but the price can also go up to $140 as well.

Now the first question arising in your mind is that how could a frame cost that much?

Well, there are several factors you need to know why the price varies so much. The construction quality or materials are almost similar in every frame. However, some come with pre-drilled holes and some don’t.

The first type cost more. Again, one frame that has only two holes for installation will cost less. Even though a complete package with an installation kit can cost you a bit more, you should go for it.

But the main reason why the price can go five times up is the compatibility. Most frames are compatible with one model. However, one that offers a universal fit will be the costlier one.

How do you put a license plate frame on a Tesla?

The old frame for the license plate may be rattling because of the loose installation. Therefore, you need to tighten the screws and stop the rattling. Sometimes, you may also need to change the screws.

All in all, a proper installation kit is necessary to ensure a perfect installation. Also, you need to follow the right steps and gather everything that is related to the installation. Here are the things you need to have.

  1. Four 5/8 inches screws.
  2. Rubber washers.
  3. Fastener nuts.
  4. A screwdriver.
  5. The frame, etc.

If you are willing to drill holes in the front and rear panel of the car, the process is pretty similar. We are going to tell you about the installation of the rear panel.

  1. Drill four holes according to the frame’s size.
  2. Put one rubber washer on each faster nut.
  3. Insert each faster nut on the four drilled holes.
  4. Now put the frame on the nuts.
  5. Then insert the screws through the frame holes.
  6. Use the screwdriver to tighten the screws.  

That is all you need to do to install a license plate frame properly and get rid of rattling.

How Cleaning a license plate frame?

Rusting is common in a metal license plate frame, and removing the rust is necessary. To remove the rust from the frame, you need to go through a complete cleaning process. A few things you need to gather for this.

You need a bucket of warm and soapy water, a scrubbing brush, a dry cloth, etc. Now let’s go through the following steps.

  1. Take bucker of warm and soapy water.
  2. Soak the frame into the warm water.
  3. Take it out after a while.
  4. Use the scrubbing brush thoroughly on the rusted surface.
  5. Again use soapy water.
  6. Pour the water slowly on the frame to remove the rust.
  7. Use the cloth to remove the water.
  8. Keep it in a ventilated and warm place to make it fully dry.

FAQs

Is there a benefit to the license plate frame?

Yes, a license plate frame protects the registration plate of your car. It also tells the officials that the car is registered legally because the license plate bears the proof. However, one can easily steal the license plate.

A durable and strong frame comes in as protection to ensure the plate or sticker remains where it is intended to remain. Also, sometimes it comes as an addition to the style of the car.

Are using license plate frames legal?

Of course, using license plate frames are legal in states as long as it doesn’t cover any registration number or letter. To be more specific, the installed frame should cover the registration number as a legal rule.

Moreover, it should also not cover any word of the state where the vehicle is registered. If it maintains these few things, the frame is always legal to use. However, you should still check out the state laws regarding legality.

Where to install a license plate frame?

You can install a license plate frame on either the front or rear of the car. However, a few cars may allow you to install frames on both sides.

Installing the plate frame at the front is much easier as you may not need to drill holes here. You can install the frame using the bumper. However, drilling holes doesn’t make the installation on the rear tough.

You need to have proper-sized screws, washers, and other installation kits to make it a hassle-free process.

When does the license plate frame rattle?

The friction between the car frame and the license plate frame is the main reason why the license plate frame rattles. Well, the friction happens when the frame is not properly installed which can lead to a loose installation.

Moreover, slim-wide frames aren’t a good option to have a proper. Although it’s convenient to install, you may have rattling in the long run.

It’s not that tough to install the plates on the front or rear. However, you should keep in mind that the tesla bike rack doesn’t hide the frame if it’s at the rear.

Final words

To protect the license plate, you should install a protective frame. Now before you make the final choice, let’s sum up things quickly.

  1. Stainless steel frame with thick powder-coating.
  2. Has both a matte and glossy finish.
  3. Four holes frames are better than two holes.
  4. The frame should come with an installation kit.
  5. Rust and UV resistant design is required.

Leave a Comment

Your email address will not be published. Required fields are marked *