Turn Signals Not Working But Hazards Do, what is the solution?

Turn Signals Not Working But Hazards Do, this problem can have many reasons. Mainly, the turn signal and hazard are connected to the same circuit board or same signal relay on the car. However, the design may be different for the different vehicles but being together is common.

First of all, one will have to start checking the most common issue which is the flash. After that, they will have to go step by step to solve the issue. Moreover, one will find detailed information below regarding the discussion.

Turn Signals Not Working But Hazards Do

When a driver is driving a car, he has many responsibilities to keep himself, the passengers, and others safe. For that, he or she will have to perform certain things to keep everything on track. One of his responsibility is letting other drivers know about his turn. Whether he is going to the left side or right side of the road is a very crucial part of driving for the others.

By the action, the driver will let the front and back of the vehicles know about his turn. Some drivers do not use the turn signal mechanism of a car which is extremely dangerous. They think it is a feature that they do not need. However, using the turn signal mechanism is bided by law. Mainly, in USA one will have to use the signal instruction mechanism otherwise they will get punishment.

Even if there is a strict law many drivers do not use the mechanism. According to a study, 48% of the drivers do not use that which is a huge number and causes many serious accidents. Well, the turn signal is a normal mechanism that is situated anywhere near the steering wheel. The placement of it will be different for the different manufacturers and different trim.

Normally, they appear to be a kind of button and the painted arrow will indicate the side of the turn. The left side arrow will indicate the driver will take a left turn and the right side arrow will indicate the driver will take a right turn.

On the other hand, the hazards of the vehicles are special signs that notify others about an emergency. If one turns ON the hazard light that means the driver is going to pull the car near somewhere to park. This is because of any emergency like having a mechanical issue or something.

Well, the signal and hazard is a mechanical feature of the car which has circuits and boards to operate. If one is facing a problem like the signal button is working but not the hazard one, they may have some issue in the circuit board. However, this will depend on the design of the circuit which will be different for different manufacturers.

Specifically, the signal and hazard feature shares the same circuit board to operate. There could be several causes of not having an operating hazard light. Those are,

a) If the signal light of the signal turn feature is not working but the hazard light does, it may be because the turn signal light bulbs are faulty. That’s why one must check the flasher or the light first before doing anything else. If the light is faulty then change it otherwise go for the next step.

b) If nothing is wrong with the turn signal flash then check the fuse of the flash. It may have some issues which caused the problem.

c) In case the flash and fuse are fine then one will have to look for any faulty connection. Also, a fault in the wire or loose wiring can cause the flash not working issue. One will have to check every connection and the wire to be sure.

d) Finally, it is time to check the electric system and switch the mechanism or the turn signal relay. If the turn signal and Hazard share the same switch then there is no problem. If they share a different switch then one must check the switch. In case they failed to diagnose the problem it is better they look for any reliable workshop to fix the issue.

Check the turn signal relay

In case the turn signal flash, fuses, and everything is okay, it is time to check the turn signal relay which is the main mechanism of the system. First of all, find the relay which is probably in the junction box of the car. However, the placement of the relay will be different for a different car. One can see the user manual to find the location.

First, check for any physical visible issue in the relay which can be anything. If not then swap the relay, there will be no issue if the relay does not migrate to another relay. There is some other way to check the relay which is not so reliable but the drivers can try like 6-volts test.

If the flasher relay is the issue one has found then they will have to replace it with a new one. The replacement of the flashers relay or turn signal relay will cost around $180 to $250 depending on vehicles and workshop. Moreover, the cost range will be in between the mentioned categories since it is not something complex or time-consuming.

Table: fixing cost of Turn Signals Not Working but Hazards Do issue for different vehicles.

These are all the facts and guidelines one will have to know regarding the issue. Many people do not give great attention to the turn signal lights or the feature which can prove harmful acts. If the signal is not working they must fix it without making any delay. Otherwise, they can because serious accidents also get a serious punishment from the government.

Conclusion

Any issues that directly involve the safety of the passengers of that car and others require great attention. The turn signal mechanism of any car is an important responsibility of every driver. By using this feature they will keep them and others safe from deadly accidents.

However, because of some issues such as bad flash and fuse, it may stop working. Once one is facing such an issue they will have to immediately solve it even if it will cause some money.